Medion P16021, Инструкция по эксплуатации

Страница: 22 / 31

English - 21 -
Dynamic Bass : Dynamic Bass is used to increase
bass effect of the TV set.
SRS TruSurround HD: By pressing “ ” or “ ” select
SRS TruSurround HD . Press “ ” or “ ” button to
set SRS TruSurround HD as on or off.
Note: If you set SRS TruSurr HD as On, some features
in the Sound menu can be unavailable to be set.
Digital Out : Sets digital out audio type.
Confi guring Your TV’s Settings
Detailed settings can be configured to suit your
personal preferences.
Press “MENU” button and select Settings icon by
using “ ” or “ ” button. Press OK button to view
Settings menu.
Operating Settings Menu Items
Press “ • ” or “ ” button to highlight a menu item.
Press • OK button to select an item.
Press • “MENU” button to exit.
Settings Menu Items
Conditional Access : Controls conditional access
modules when available.
Language : Confi gures language settings.
Parental : Confi gures parental settings.
Timers : Sets timers for selected programmes.
Date/Time : Sets date and time.
Sources : Enables or disables selected source
options.
Other Settings : Displays other setting options of
the TV set.
Using a Conditional Access
Module
IMPORTANT: Insert or remove the CI module only
when the TV is SWITCHED OFF.
In order to watch certain digital channels, a •
conditional access module (CAM) can be necessary.
This module must be inserted in the CI slot of your
TV.
Obtain the Conditional Access Module (CAM) and •
the viewing card by subscribing to a pay channel
company, then insert those to the TV using the
following procedure.
Insert the CAM and then the viewing card to the •
slot that is located in the terminal cover at the rear
side of the TV.
The CAM should be correctly inserted, it is •
impossible to insert fully if reversed. The CAM or
the TV terminal may be damaged if the CAM is
forcefully inserted.
Connect the TV to the mains supply, switch on
and then wait for few moments until the card is
activated.
When no module is inserted, “ • No Common
Interface module detected ” message appears on
the screen.
Refer to the module instruction manual for details •
of the settings.
Viewing Conditional Access Menu (*)
(*) These menu settings may change depending on
the service provider.
Press “MENU” button and select the icon by using
“ ” or “ ” button. Press OK button to view Settings
menu. Use “ ” or “ ” button to highlight Conditional
Access and press OK to view menu items.
B02_MB61_[GB]_5110UK_IDTV_GOLD12_37884W_10070326_50179516.indd 21 B02_MB61_[GB]_5110UK_IDTV_GOLD12_37884W_10070326_50179516.indd 21 27.10.2010 14:22:25 27.10.2010 14:22:25