Medion MD 8818, Инструкция по эксплуатации

Страница: 72 / 114

The Remote Control
62
Changing the transmission/reception
channels
If several computers with remote controls are set up in close
proximity of each other (approx. 10 metres), this can lead to
disturbance. This can be remedied by choosing different channels.
Only reset the remote control in case of disturbances.
Proceed as follows:
1. Start the Control Panel and select the option Other Control
Panel Options.
2. Choose the menu item Wireless Remote Settings .
3. Select the option " The software may only function with
the remote maintenance adjusted on this channel ".
4. Select the new channel (a number between 1 and 16) in and
confirm your setting with the
Apply button.
5. Press and hold the green Media Center button until the
LED starts flashing.
6. Release the button, the LED stops blinking and the light is
on.
7. Now enter the new channel for the remote and confirm with
the green Media Center button.
8. Press any button on your remote to see the current code.
9. Confirm your settings by using the OK button of the Wireless
Remote Settings window.