Medion MD 8818, Инструкция по эксплуатации

Страница: 53 / 114

Safet
y
Connectin
g
Operation
Help
Append
ix
Operation
43
The optical drive
Diagram reference: C1
Loading a disc:
Attention!
Do not place protective foils or other stickers on your
discs. To avoid damage to your drive, do not use
deformed of damaged discs.
Attention!
Do not use scratched or dirty disks, discs with pieces
broken off or disks of poor quality. Because of the high
speeds in the drive the discs might break and damage
your data as well as your drive. Examine the discs
before you enter them. If damage or dirt is visible, you
should not use them. Damage caused by faulty media
is excluded from warranty and their repair must be
charged.
1. Pull the eject button (Diagram reference, C2 ) on the right of
the optical drive to open the tray.
2. Place the disc on the tray so that it lays flat with the label
facing upward.
3. Pull the eject button again to close the tray.
Note
Many discs start automatically when they are inserted.
This depends on the operating system and the
corresponding settings.