Network settings
NETWORK
TYPE
Here you select the network type:
WIRELESS DEVICE
or
WIRED DEVICE
.
After making a selection with the direction buttons
and confirming
with the
OK
button, an overview of all available networks appears. Make
a selection and confirm with the
OK
button. If a password is required for a
network, a virtual keyboard appears which you can use to enter this with the
help of the direction buttons
and the
OK
button. After entering the
password, select
OK
on the keyboard and confirm with the
OK
button.
PRESS WPS
ON YOUR WI-
FI ROUTER
(only for WLAN)
This option enables you to quickly establish a WPS connection via a wireless
network (Wi-Fi). Hold down the WPS button on your router and confirm this
option
OK
using the
OK
button. Then the WPS connection will be made.
INTERNET
SPEED TEST
Press the
OK
button in order to test the Internet speed.
ADVANCED
SETTINGS
Press the
OK
button to call up further network configuration options.
CONFIGURATION
Choose the setting
AUTOMATIC IP
or
MANUAL IP
. If
you select
MANUAL IP
, three additional lines appear
in which you can manually enter the data for the
IP
ADRESS, SUBNET MASK
and
DEFAULT GATEWAY
using the direction buttons
and the number
buttons.
CONFIGURATION
Select here between
AUTOMATIC DNS
or
MANUAL
DNS
. If you select
MANUAL DNS
, two additional lines
appear in which you can manually enter the data for
the
DNS SERVER 1
and
DNS SERVER 2
using the
direction buttons
and the number buttons.
An existing network connection can be terminated by pressing
the
red button
.
WAKE ON
Activate/deactivate the Wake-On LAN/Wake-On Wireless LAN function (WoL/
WoWLAN). This enables you to switch on the smart TV via a different device
(e.g. a smartphone with the MEDION® Life Remote App). Both devices must
be connected to the same network via LAN or Wi-Fi for this purpose. Select
the
ON
setting to activate this function. The device being used as a remote
control needs to be connected to the TV once when it is switched on. The
control function only works when the TV is in standby mode. If the TV is
turned off and on again at the mains switch, the connection between the two
devices will be automatically restored.
Exit the network settings by pressing
OK
.
After exiting the network settings, the channel search will start for your previously selected
preferred reception type. Also pay attention to any other information that is displayed on the
screen depending on your selection.
12
31325-6_31336-8 ML eCom QSG 30025 265-6_366-7_386-7 Final.indb 12
31325-6_31336-8 ML eCom QSG 30025 265-6_366-7_386-7 Final.indb 12
08.08.2018 12:47:38
08.08.2018 12:47:38
