You also have the option of connecting a digital satellite system to the connection labelled
LNB
.
Screw the F connector of a coaxial antenna cable onto the connection on the smart TV.
To receive encrypted/subscription channels you will need to use a CI module and
an appropriate card. Insert a CI module (available in specialist shops) into the slot
provided for this purpose on the left-hand side of the device (
Common Interface
).
You can then insert the card from your provider into the CI module.
3.5. Connecting the power supply
Connect the mains plug on the device to an easily accessible 220 - 240 V ~ 50 Hz mains socket.
3.6. Switching the smart TV on and off
Set the power switch on the bottom of the device to
O N
. The device switches to standby mode
and the display on the front will light up.
To switch on the device, press
−
on the remote control: the Standby/On button , one of the number buttons or one of the
P - / +
buttons;
−
on the device: the multifunction button .
Use the Standby/On button on the remote control to switch the device back into standby
mode. Although the device has been switched off, it will continue to consume electricity.
Use the mains switch to turn off the device (
OFF
position). The device will continue to consume
power as long as it is connected to the mains network.
If the device is not receiving an input signal, it will automatically switch to standby
mode after five minutes. A countdown timer will appear on the screen until this
time. This function is not available for all sources
.
3.7. Channel search when switching on for the fi rst time
When you switch the device on for the first time, you will be guided through the
FIRST TIME
INSTALLATION
menu.You can call up and carry out the first-time installation again at any time via
the menu
INSTALLATION > FIRST TIME INSTALLATION
.
First time installation
Velkommen, vælg venligst et sprog!
Dansk
Willkommen, Wählen Sie bitte Ihre Sprache aus!
Deutsch
Tere tulemast, palun valige oma keel!
Eesti
Welcome please select your language!
English
Bienvenido, seleccione un idioma
Español
Καλώς ήλΘατε, παρακαλούμε επιλέξτε τη γλώσσα σας!
Ελληνικά
Bienvenue ! Veuillez choisir une langue.
Français
Fáilte roghnaigh do theanga, led‘ thoil!
Gaeilge
Dobro došli, molim izaberite svoj jezik!
Hrvatski
Benvenuti, Selezionate la vostra luingua!
Italiano
Esiet sveicināts, lūdzu, izvlts. savu vald.!
Latviešu
Sveiki! Pasirinkite savo kalbą
Lietuvių k.
Select language
Set language
OK
You can move up or down in the menu and select the required language using the direction
buttons
.
After confirming the selected language with
O K
the initial installation will begin
10
31325-6_31336-8 ML eCom QSG 30025 265-6_366-7_386-7 Final.indb 10
31325-6_31336-8 ML eCom QSG 30025 265-6_366-7_386-7 Final.indb 10
08.08.2018 12:47:37
08.08.2018 12:47:37
