14
ATTENTION!
There is a risk of explosion if batteries are replaced incorrectly. Replace bat-
teries only with the same or equivalent type.
Inserting the batteries in the remote control
The remote control is supplied with a 3 V CR2025 lithium battery already inserted.
NOTE
When you use the remote control for the first time, pull out the transpar-
ent strip marked “Please remove before use” without opening the bat-
tery compartment.
If the product fails to respond or is slow to respond to the remote control, you will
need to change the battery. Proceed as follows to change the battery:
Press the catch (1) and remove the battery holder complete with battery (2) from
the remote control. Comply with the legal requirements when disposing of the
dead battery.
Insert a new 3 V CR2025 battery in the holder with the positive terminal facing
upwards. Always make sure the battery is the right way round.
Push the battery holder complete with battery back into the remote control as
far as it will go.
ATTENTION!
There is a risk of explosion if batteries are replaced incorrectly. Replace bat-
teries only with the same or equivalent type.
Hanging the device
The kitchen radio is designed to be mounted on the underside of a wall cupboard
or shelf unit. To mount the device, you will need 4 screws. The size and length of the
screws must match the mounting plate and bracket.
Select a space near a mains plug.
Use the mounting bracket to mark the drill holes.
83963 EN Aldi ES PL RC1 Content.indd 14
83963 EN Aldi ES PL RC1 Content.indd 14
21.09.2012 09:34:12
21.09.2012 09:34:12