Medion Erazer, Инструкция по эксплуатации

Страница: 33 / 92

English
- 24 -
Getting Started
The software on this PC comes fully pre-installed . You do not have to load any of the
CD's/DVD’s supplied.
With many programs (e.g., telephone-CD's or encyclopaedias), however, it is necessary to
insert the corresponding CD/DVD in order to call up the data which is stored on it. The
software will ask you to do this as necessary. Once you have made all the connections and
secured the necessary connectors you can turn on the monitor, the other peripherals and
finally the PC itself.
Step 1: Power On
1. Power on the monitor and your peripherals.
Switch
Diagram reference: N
2. Provide power to your PC by pressing the switch to
position [
I ].(You will stop the flow of current to the PC
by pressing the switch to position [ 0 ])
On/off Switch
Diagram reference: B
3. Press the On/off switch briefly to start loading the operating system.
You can program the function of the main switch in the power management of Windows®
(please refer to on-line help). The PC will always be switched off, if the main switch is
pressed for more than 4 seconds.
Warning!
If the operating system is not shut down properly (through

), then there is a risk of data loss.