Medion ERAZER X54911, Руководство по эксплуатации

Страница: 13 / 30

DE
EN
ES
FR
IT
NL
15
7. Getting started
7.1. Before connecting the monitor
It is possible that your existing monitor supports a physical resolution that is not
supported by your new monitor. In this case, the image on your new monitor may
not appear correctly once it has been connected.

To prevent this, select a physical resolution that is supported by both monitors
and, if necessary, set this physical resolution in your operating system before
connecting the new monitor.
A table listing the physical resolutions supported by this monitor can be found in
section “7.7. Setting the monitor resolution” on page 21.
7.2. Mounting the stand
Attach the monitor stand as shown in the illustration. Carry out this step before con-
necting the monitor.

Place the monitor on a level surface with the monitor surface facing down.

Place the mounting plate of the monitor stand in the recess on the rear of the
monitor (A).

Use two of the supplied screws to screw the mounting plate together. Use a Phil-
lips screwdriver to do so.

Now attach the foot to the bottom of the stand (B). Take care to ensure that the
connecting piece fits in the device recesses.

Secure the foot with the remaining three screws supplied using the screwdriver.
A
B