19
Installation
NOTICE!
Risk of damage!
Do not apply excessive force as this may damage the screw holes.
Inserting the batteries in the remote control
− Remove the battery compartment cover on the back of the remote control.
− Insert two AAA 1.5 V batteries in the battery compartment of the remote control. Check the battery polarity
(inscribed on the bottom of the battery compartment).
− Close the battery compartment.
NOTICE!
Risk of damage!
Remove the batteries from the remote control if the device is not going to be used for a long peri-
od. The remote control could be damaged by leaking batteries.
Connecting the antenna
Your Full HD LED LCD TV supports different antenna signals. You can input the following image signals to the televi-
sion through the connection labelled
RF
11
:
• via analogue cable / an analogue house antenna,
• via a DVB-T
1
antenna or
• via a DVB-C
*
connection
− Insert the antenna cable either from the house antenna /analogue cable connection, a DVB-T antenna or the
DVB-C connection into the antenna connection on the Full HD LED LCD TV.
Connecting the mains adapter
− Insert the jack plug on the supplied mains adapter into the POWER DC IN socket
17
on the device.
− Connect the mains plug on the device to an easily accessible 100 - 240 V ~ 50 Hz mains socket.
NOTICE!
Risk of damage!
Using a different mains adapter may damage the device.
− Only use the supplied mains adapter.
Switching the Full HD LED LCD TV on and off
− The device will be in standby mode as soon as you have connected the mains plug with the mains socket.
− In order to switch on the device, press
- on the remote control: the Standby/On button
43
;
- on the device: the
POWER
button
5
.
− You can switch the device back into standby mode using the Standby/On button on the remote control (or
the
POWER
button on the device). Although the device has been switched off, it will continue to consume
electricity.
If the device is not receiving an input signal, it will automatically switch to standby mode
after fi ve minutes. A countdown timer will appear on the screen until this time. This func-
tion is not available for all sources.
1
This service must be available in your region
IMA 21571 Content V2.0.indd 19
IMA 21571 Content V2.0.indd 19
29.11.2019 08:53:07
29.11.2019 08:53:07
