30
8.2.2. Installing a 2.5" SSD drive in a 2.5"/3.5" mobile rack
When installing an SSD drive, follow the first four steps in the previous instructions
and then proceed as follows:
The upper side of the hard drive is face up and the contacts are to the bottom
right.
Now insert the right side of the hard drive into the mobile rack.
Tightly hold the hard drive and the mobile rack, turn it over
and use four M3 x 4 mm countersunk screws (not supplied)
to screw the hard drive in place using the corresponding
screw holes.
The hard drive decoupler does not need to be replaced because the
hard drive has been sufficiently secured in place by the screws.
Carefully slide the mobile rack into the slot until it clicks into place.
Lock the mobile rack in place by pressing on the handle until it audibly clicks
into place. The hard drive will be recognised and can now be used.
34140 EN ALDI UK Content 2006 3872 RC1.indb 30
34140 EN ALDI UK Content 2006 3872 RC1.indb 30
14.03.2019 15:32:15
14.03.2019 15:32:15
