manualshive.com logo in svg

Medifab Bingo Evaluion, Руководство пользователя, Страница: 29 / 38

Поделиться
Скачать
Medifab Bingo Evaluion Скачать руководство пользователя страница 29

28

Make sure that the chest and shoulder pad is positioned

symmetrically on the pelvis and close the buckles on the lower

straps.

• Set the upper body of your child upright against the back.

• Finally, tighten the upper straps behind the seat and close the

buckles on the upper straps.

The fit and position of the harness is correct when the straps are not

touching the child and when the beaded edge of the harness is not

in contact with the strap guide slot.

The harness provides the best upper-body support when the strap

guide slot is approx. 2-3 cm above the child’s shoulder.

5.17 Abduction block fixed / swing away

The 

BINGO Evolution 

can be supplied with a fixed or a swing away 

abduction block.

You can swing away the swing away abduction block for an easy get 

in. 

To swing away: 

• Position in front of the 

BINGO Evolution

 and press with one hand 

the blocking clamp

 

as shown and swing away the abduction block 

with the other hand downwards (112).

Illustration 113 shows the swing away abduction block.

5.18 Grab rail with upholstery

Guide the longer part of the grab rail into one side of the retainer for 

accessories.

After this guide the shorter end of the grab rail by pressing the snap 

button into the other retainer for accessories.

110

111

112

113

114

Содержание Bingo Evaluion







































Отзывы:

Нет отзывов