manualshive.com logo in svg

Medifab Bingo Evaluion, Руководство пользователя, Страница: 14 / 38

Поделиться
Скачать
Medifab Bingo Evaluion Скачать руководство пользователя страница 14

13

4.6 Lateral support

• The lateral supports can be detached for the transport.

4.7 Thigh supports

After loosening the wing nuts under the seat (32) it is possible 

to adjust the thigh supports concerning the depth and the width 

continuously variable

 

(see 4.3).

4.8 Back height

• Loose the wing nuts on the backrest and the cap nuts on the top 

and adjust your desired back height.

Whenever you change any settings on the 

BINGO

 

Evolution

, make sure that you firmly tighten any 

screws that have been loosened.

From a back height of approximately 55 cm for seat size 1 and 66 cm

for seat size 2 the back frame has to be placed on the backrest plate 

from the top to the bottom position.

Whenever you change any settings on the 

BINGO

 

Evolution

, make sure that you firmly tighten any 

screws that have been loosened.

4.9 Recline

• Stand behind the seat first and activate the wheel lock. Secure the

  backrest with one hand before you operate the toggle lever with 

the other hand.

• Adjust the backrest into the desired position.

36

37

38

39

40

Содержание Bingo Evaluion







































Отзывы:

Нет отзывов