manualshive.com logo in svg

Medifab Bingo Evaluion, Руководство пользователя, Страница: 16 / 38

Поделиться
Скачать
Medifab Bingo Evaluion Скачать руководство пользователя страница 16

15

A

B

4.14 Foot rest lock (optional)

By pulling the release ring, the foot rest can be folded upwards. 

When the foot rest is folded down, it will automatically lock into 

position.

Whenever you change any settings on the 

BINGO

 

Evolution

, make sure that you firmly tighten any 

screws that have been loosened.

4.15 Detaching and attaching the seat unit

To transport 

BINGO Evolution

 in a car or to share the weight  into 

two incidents, it is easy to detach the seat unit from the street frame. 

This is also of value, if you want to use the BINGO seat unit on an 

indoor mobility base.

• Before you detach or attach the seat unit always secure the

  pushchair by putting on the brake.

 • Ensure that the backrest is in the 90° position.

Detaching

• Stand beside the seat unit.

• Pull the active handle of the tilt in space function and swing the 

seat unit until the locking button adjoins the plate of the seat 

bracket.

• Press the locking button (see 47, detail) and swing the seat unit, 

that the seat stands vertically to the floor (47).

• Catch the seat unit additionally on the footrest hanger (48) and lift  

the seat unit.

Attaching

• Catch the seat unit (48) on the backrest and on the footrest 

hanger.

• Position the seat unit, that the seat stands vertically to the floor 

(47). Attach the seat unit on the street frame and make sure, that 

the guide shaft (A) slides into the (tilt) bracket (B) on both sides.

• Swing the seat unit until the locking pins engage hearable in the 

(tilt) base (in the 45° position).

• Adjust the seat unit and the recline into the desired position as 

described under 4.17 and. 4.9.

Caution!

Excess strap ends on accessories may be trapped in 

the tilt mechanism and can avoid the engagement of the 

locking pins. In such a case the seat could fall off the 

mobility base. Shorten excess strap ends on accessories 

so that they can not be trapped.

Check by pulling the seat sharply forward that the seat 

unit is properly engaged. Check that the locking pins are 

completely engaged. Push in completely, if necessary.

4.16 Use of the seat unit in a reverse riding direction

The seat unit can also be used in a reverse riding direction.

46

47

48

49

50

Detail

Содержание Bingo Evaluion







































Отзывы:

Нет отзывов