manualshive.com logo in svg

Medifab Bingo Evaluion, Руководство пользователя, Страница: 24 / 38

Поделиться
Скачать
Medifab Bingo Evaluion Скачать руководство пользователя страница 24

23

5.10  4-point lap belt

The assembly should be performed by trained technicians.

By pressing the plug ends the lap belt opens.

At the belt buckle the lap belt can be readjusted by adducting the

lap ends (fine tuning).

First the seat upholstery have to be removed. Then guide the 

triglides for the tension belts as shown through the long holes of the 

thigh supports (86).

Then thread the belt ends through the triglides as shown (87).

The lap ends and the tension belts of the 4-point lap belt get 

mounted and pre adjusted (length) as described under 5.9 lap belt.

5.11 Five-point harness

The five point harness should be installed by authorized dealers or

trained technicians.

Take the seat upholstery off first. Loosen the bolts of the foot rest 

hanger.

In the seat plate are long holes. Choose after adjusting the seat 

depth one long hole to guide the belt. The position should be close to 

the body but not underneath the bottom.

• Remove the belt housing and the triglide first.
• Guide the belt end through the seat plate and the seat frame tube 

until the arrester and guide it to the surface through the choosen 

long hole.

• Tighten the bolts of the foot rest hanger firmly.
• Fix the seat cushion and guide the belt upwards through the slot in 

the cushion.

• To attach the strap to the buckle proceed as described in 5.89 lap
  belt.

85

86

87

88

89

Содержание Bingo Evaluion







































Отзывы:

Нет отзывов