MEDICSIGHT MEDICCO2LON Скачать руководство пользователя страница 37

Страница: 37 / 40

Ultratec’

s employees, dealers or representatives have no authority to vary the terms of this

Warranty. This Warranty does not create any contractual relationship between

Ultratec

and the

Purchaser and the Purchaser buying the Equipment, must look to the performance of contractual

obligations between itself and the dealer from whom the machine was bought.

Ultratec

shall,

however, fulfil the terms of this Warranty.

7. The Equipment is designed to operate on 90 to 260 V AC, 46-64 Hz. Single Phase and Power

Supply only.

8. This Warranty will automatically terminate on the expiry of the warranty Term of 36 months,

even if the Equipment is not used for any time during the Term for any reason whatsoever,

including any technical breakdown and time taken for such repairs and/or replacement of the

parts and transit, whether under this Warranty or otherwise, such time shall not be added to the

Warranty period.

9. While

Ultratec

will make every reasonable effort to carry out repairs and/or replacement of

parts under this Warranty as soon as possible,

Ultratec

shall not be liable to do so within any

specific period of time.

10. In the event of repairs and/or replacement of any parts, this Warranty will continue to remain in

force only for the unexpired period of the Warranty.

11. It is entirely left to

Ultratec

s discretion to effect repairs and/or replacement of Equipment

parts at the site of installation or at any service stations of its branches or of the authorized

representatives and/or dealers or its own manufacturing facility.

12. If the original Serial Number of the Equipment is removed, obliterated or altered, then this

Warranty will cease to be valid.

13. Any damage to the Equipment or any part thereof caused during moving or transportation

is not covered by this Warranty. Purchasers are advised that all risks, inclusive of failure of the

Equipment in transit, are to be covered by the Purchasers own insurance policy at their own cost.

14. Only the courts of England and Wales shall have the jurisdiction for settling any claims, disputes

arising under this Warranty and English Law shall apply to the terms of this Warranty.

* * * * *

8. WARRANTY

Содержание MEDICCO2LON








































Результаты поиска

Содержание MEDICCO2LON

Отзывы:

Бренды по названию

Популярные бренды

MEDICSIGHT MEDICCO2LON, Руководство пользователя

Результаты поиска

Содержание MEDICCO2LON

Отзывы:

Бренды по названию

Популярные бренды