MEDICSIGHT MEDICCO2LON Скачать руководство пользователя страница 28

Страница: 28 / 40

6. MAINTENANCE

Pressure Display

is red and alarm

sounds

• Actual pressure is

50mmHg or higher

• Gas delivery line

blocked

1. Unit will automatically vent to target pressure

within several seconds. Thereafter, alarm will

silence.

2. Should pressure remain above target pressure,

power unit down and disconnect Administration

Set from unit.

3. Check patient connection and re-establish as

required.

4. Should checking 1), 2) and 3) fail to rectify

the problem, call distributor representative for

service.

Volume Display and

Volume Reset icons

do not operate as

specified

• Internal fault or

failure

1. Power unit OFF / ON.

2. Set Pressure and/or Flow greater than zero.

3. Should checking 1) and 2) fail to rectify the

problem, call distributor representative for

service.

Start/Resume/

Stop icon does not

operate as specified

• Internal fault or

failure

1. Power unit OFF / ON.

2. Should checking 1) fail to rectify the problem,

contact the distributor representative.

SD card error/SD

card full indicator

displayed

• SD card corrupted

or full.

1. Power unit OFF and Eject the SD card.

2. Replace with a new SD card (SDSC cards only,

available from distributor).

3. Power unit On.

3. Should checking 1) and 2) fail to rectify the

problem, contact the distributor representative.

6.2

Cleaning and Sterilisation Precautions

• Follow universal precautions for protective apparel when handling and cleaning

contaminated instruments.

• Examine the device carefully for any damage before every use. Do not use if

there is any physical degradation, fraying or other damage to the cables, tubes,

hoses or connectors.

• The Administration Set is supplied non-sterile.

• Administration sets are single use and should be disposed of in accordance with

local hospital policy and with regard to all applicable regulations, including but

without limitation to, those pertaining to human health & safety and care of the

Содержание MEDICCO2LON








































Результаты поиска

Содержание MEDICCO2LON

Отзывы:

Бренды по названию

Популярные бренды

MEDICSIGHT MEDICCO2LON, Руководство пользователя

Результаты поиска

Содержание MEDICCO2LON

Отзывы:

Бренды по названию

Популярные бренды