MEDICSIGHT MEDICCO2LON, Руководство пользователя

Страница: 32 / 40

32
Copyright © 2020 Ultrasound Technologies Ltd
32
7. EQUIPMENT
SPECIFICATION
Length of catheter: Type I – 230mm (±5mm) and Type II – 410mm (±5mm)
ATTENTION:
The Administration Set is supplied non-sterile.
7.3 Environmental Requirements
Operating
Ambient Tempe10°C to +40°C
Relative Humidity 30 – 70% non-condensing
Ambient Pressure 700 kPa to 1060 kPa
Transit and Storage
Ambient Temperature -40°C to +70°C
Relative Humidity 10% to 100%, including condensation
Ambient Pressure 500 kPa to 1060 kPa
WARNING: Not to be used in the presence of flammable gases. This unit has
not been tested for MR compatibility and should not be introduced into a MR
examination suite.
7.4 EMC Tables
Table 1: Guidance and Manufacturer’s Declaration – Electromagnetic Emissions
The MedicCO
2
LON device is intended for use within the electromagnetic environment
specified below. The customer or the operator of the MedicCO
2
LON device should ensure
that it is only used within such an environment.
Emissions Test Compliance Electromagnetic environment - guidance
RF Emissions CISPR 11 Group 1 The MedicCO
2
LON device uses AC Power for its internal
function. Therefore, its RF emissions are very low and
are not likely to cause any interference in nearby
electronic equipment.
RF Emissions CISPR 11 Class A
Harmonic Emissions
IEC 61000-3-2
Class A
Voltage fluctuations /
flicker emissions
IEC 61000-3-3
Complies