User Guide
9
Testing your
System
WiredHome_BaseStation_User_Guide_MHP8016-019A_mech.indd 11
6/7/2019 4:06:32 PM
SRDR-00028 Rev 1
Press your help button until it flashes green or press the blue "HELP" button on
the Base Station.
The Base Station will announce "Calling for Help" multiple times and emit a few
beeps. "Calling for Help" will continue to be announced until it connects.
The status LED on the Base Station goes solid red from the moment it's activat-
ed and only goes back to green when the call is completed.
The Base Station will announce "Call connected, please wait" and then "Your
alarm has been received, please stand by for an operator" once it is connected
to an operator.
Please inform operator that you are testing the system, and that you do not
need emergency assistance. If you do not state that you are testing, EMS will
be contacted.
Once the operator disconnects, the status LED on the Base Station goes back to
green and the Base Station announces "System Ready.”
