Medialon Showmaster Go, Руководство по оборудованию

Страница: 73 / 80

Showmaster Maintenance
Medialon Control System p 71 of 80
User Reference Manual
M515-2 | 2020-May
• Notify : This type of message indicates an unusual event that occurred spontaneously, it has
a little bit more importance than the Normal type.
• Comment : a comment.
•
Alarm : Something which is not critical has occurred, but should not normally occur. It
shouldn’t have a big impact, but should be checked.
•
Error : An error occurred which has significant impact. Something is no longer working.
•
Fatal : The same as Error, but it makes the system stop working.
•
Debug : Low Level traces, should be activated after a request by Medialon support.
Select the sources of messages:
• mShowmasterCore : Showmaster’s main engine
• ManagerRT : the show control project engine
• Showmaster DMX : DMX resources
• Showmaster I/O : Relay and Digital Input resources
• Showmaster MIDI : MIDI resources
• Showmaster Serial : Serial resources
• etc.
This list depends on active Medialon MxMs inside the Medialon Showmaster.
The following lists of message descriptions is non-exhaustive.
3.3.2 Notify Messages
mShowmasterCore Messages
•
< Session ID xxx asked to reboot Showmaster >
The session xxx (connection from Showmaster Editor V2 or Medialon Recovery Tools) has
asked to reboot Showmaster.
• < Session ID xxx asked to shutdown Showmaster >
The session xxx (connection from Showmaster Editor V2 or Medialon Recovery Tools) has
asked to shutdown Showmaster.
• < Session ID xxx asked to reset Showmaster to factory >
The session xxx (connection from Showmaster Editor V2 or Medialon Recovery Tools) has
asked to reset Showmaster to its factory state.