Medialon Showmaster Go, Руководство по оборудованию

Страница: 10 / 80

Showmaster Overview
Medialon Control System p 8 of 80
User Reference Manual
M515-2 | 2020-May
The rear panel has four DisplayPort outputs (for Local Panels), a GPIO port with 3 software-
configurable channels of Input or Output, two 10/100/1000 Base-T Ethernet ports, and two
USB 2.0 type A ports.
Showmaster Go runs Windows 10 IoT Enterprise LTSC and includes Medialon Manager (Lite or
Pro, depending on licensing) and MAS Pro software (licensed for 16, 32 or 64 channels of Dante
output).
2.1.1 Showmaster Architecture
The remainder of this section is specific to the Showmaster Pro and Showmaster LE
architecture, since it differs from Medialon Manager, documented elsewhere in this manual.
The following sections only apply to Showmaster LE and Showmaster Pro.
2.1.2 Medialon Showmaster Modes
Showmaster LE/Pro switches between different modes to run, program and maintain it.
Running or Normal Mode
This is the default mode of Medialon Showmaster LE/Pro. At startup, Showmaster LE/Pro uses
its locally connected resources and runs the show.
• Device Commands are executed when the Timeline runs.
• The Devices send command orders using a Medialon plug-in (MxM) through the appropriate
resources (MRC) to connected machines.