Media5 Mediatrix 4104, Справочное руководство

Страница: 50 / 466

Chapter 2 - Web Interface – Introduction Syslog Monitoring
28 Mediatrix 4104
3. If the Syslog configuration source is Static , enter the Syslog server static IP address or domain
name in the Static Syslog Host field.
4. If the Syslog configuration source is Static , enter the Syslog server static IP port number in the
Static Syslog Port field.
5. Set the syslog severity level in the Syslog Max. Severity choices.
This indicates which syslog message is processed. Any syslog message with a severity value
greater than the selected value is ignored by the agent.
• Disabled
• Critical
• Error
• Warning
• Informational
• Debug
A higher level mask includes lower level masks, e.g., Warning includes Error and Critical .
6. Click Submit if you do not need to set other parameters.
The following are some of the messages the unit sends:
Configuring the Syslog Daemon Application
You shall configure the Syslog daemon to capture those messages. Refer to your Syslog daemon’s
documentation to learn how to properly configure it to capture messages.
Note:
The current syslog information is displayed in the Syslog Info section.
Table 16: Syslog Messages Examples
Event Level Message
The configuration update with the
specific configuration file has been
successful (configuration file fetching) Informational
The specific configuration
update succeeded.
The configuration update with the
specific configuration file experienced an
error and has not been completed
(configuration file fetching) Error The specific configuration
update failed.
The software update has been
successful Informational The software update succeeded.
The software update experienced an
error and has not been completed Error The software update failed.