Media5 Mediatrix 4104, Справочное руководство

Страница: 75 / 466

Firmware Download Reference Manual (SIP Version)
Mediatrix 4104 53
3. If you set the Firmware Location Provision Source parameter to remoteFile (see Step 1):
a. Create a text file and write the path and/or name of the directory that contains the files required
for download. Save this file as “mediatrix4104targetimage.inf” under the server root path.
b. Configure the path of the “mediatrix4104targetimage.inf” file in the Firmware Selection File
Location field.
Note that the selection file name is in lower case. Some web servers are case sensitive. The
path must contain a maximum of 63 characters.
This is useful if you are using automatic updates with multiple units. If you want the units to
download a new version, you only have to change the path once in the
“mediatrix4104targetimage.inf” file. If you were to use the
Firmware Location field, you would
have to change the path in every unit.
4. Click Submit if you do not need to set other parameters.
Example
Let’s consider the following example:

The directory that contains the files required for download is called: SIP_v5.0.1.1_MX-S5001-
01 .

This directory is under C:/Root/Download .
The following are some tips to help your download process:

If available, use the Browse button (or equivalent) of the TFTP/HTTP server to select the
directory, eliminating typographical errors.

Use the “/” character when defining the path to indicate sub-directories. For instance, root/
download .
If you are using the TFTP protocol to download the firmware, note that some TFTP servers on
Windows do not recognize the “/” character and produce an error. In this case, use the “\” character.

Use basic directory names, without spaces or special characters such as “~”, “@”, etc., which
may
cause problems .

Cut and paste the path and/or name of the directory that contains the extracted files into the
image path of the Mediatrix 4104 (you may have to convert “\” into “/”) to eliminate typographical
errors.
Note that you can define the C:/Root/Download part as you want. The file names may also differ from the
example shown above.
Note:
If you leave the file empty, the Mediatrix 4104 will look for the firmware download information in the
root directory of the image server.
Note:
The current firmware server information is displayed in the Status section.
Table 38: Path Configurations Example
Root Path Corresponding Path Name
c:/root/download SIP_v5.0.1.1_MX-S5001-01
c:/ root/download/SIP_v5.0.1.1_MX-S5001-01
c:/root download/SIP_v5.0.1.1_MX-S5001-01