Configuration Notes 281
Page 8 of 25
SIP Configuration
The purpose of this section is to setup the Mediatrix 3000 DG to use your SIP server for registration and call routing.
The SIP configuration tells the Mediatrix 3000 DG which SIP servers, parameters, and phone numbers to use. The following
steps configure the Mediatrix 3000 DG as illustrated in the sample network topology.
1. Click the
SIP
menu, then the
Servers
sub-menu. The following window appears:
2. Set the
Registrar Host
field to the address of the central SIP Server
192.168.9.201
.
3. Set the
Proxy Host
field
to the address of the central SIP Server
192.168.9.201
.
4. Click
Submit
to save the configuration changes. The Mediatrix 3000 DG is now configured to use your SIP server.
5. OPTIONAL STEP: if your SIP server requires SIP authentication, further configuration steps are necessary so the
Mediatrix 3000 DG has all the needed information to authenticate to the server (see the section
Further
Information and Configuration
for more details).
ISDN Configuration
The purpose of this section is to configure the Mediatrix 3000 DG
’s ISDN PRI interfaces in Terminal mode (TE) for an E1 line
type. The PSTN line to which the Mediatrix 3000 DG is connected must be in Network mode (NT). If your setup differs,
please refer to the section
Further Information and Configuration
for more details.
The ISDN configuration tells the Mediatrix 3000 DG how its ISDN PRI interfaces should behave. You must configure the
ISDN parameters of the Mediatrix 3000 DG digital gateways for each interface you intend to use.
