Configuration Notes 281
Page 20 of 25
4. Click
Submit
to apply changes and save the new route.
5. You are brought back to the
Call Routing Config
sub-menu. You can see the route you just created in the
Route
section. You can also see the yellow
Yes
warning you that the configuration has been modified but not applied
(i.e., the
Call Routing Status
differs from the
Call Routing Config
).
6. Repeat steps 2 to 5 twice to create two additional routes. These new routes will satisfy call scenario A described in
Deployment Scenario
, where phone 2 calls phone 1:
o
one from
Source
isdn-Slot2/E1T1
to
Destination
sip-default
using
Mapping
From_PSTN
, and
o
one from
Source
isdn-Slot3/E1T1
to
Destination
sip-default
using
Mapping
From_PSTN
.
