Configuration Notes 281
Page 10 of 25
3. In the
Interface Configuration
section, set the
Endpoint Type
field to
TE
. Leave all other parameters to their default
values.
NOTE: The
Line Coding
,
Line Framing,
and
Signaling Protocol
fields are left to common default values here.
However, they must be compatible with your setup. If your setup differs, please refer to the section
Further
Information and Configuration
for more details.
4. Click
Submit
to apply the configuration changes made to this interface.
5. If you have modified values, the parameters that have just been configured require a restart of the ISDN service. A
service is a logical group of features. Restarting a service is a required mechanism for certain elements in the
configuration. However, you can finish with the ISDN configuration steps before doing that. Once the ISDN
configuration is ready, follow the instructions from
Appendix A - Restarting a Service
to restart the ISDN service
as required.
