media-tech MT4050, Руководство пользователя

Страница: 9 / 13

9
EN
Note: IR button can control work mode of IR LED� IR LED
may have auto, forced close two mode, the IR LED will pow-
er on or off according to environment light in auto mode;
the IR LED always power off in forced close mode�
4 Setting device parameters
Click
4
button to enter setting interface, you can set all
parameters of the camera described later in this in manual�
Only administrator can login to set these parameters�
Device information
Device status
The user can obtain “Device firmware version”,” Web UI ver-
sion”, “Alias”, “AP MAC” etc�
Device alias setting
The user can name the camera, example for home, office
etc�
Device date and time setting
You can enable “Sync with NTP Server” when the device
was connected to WAN, but need to select correct time
zone where the camera is located, otherwise need to se-
lect“ Sync with PC time”�
Remark: Please carefully check the camera time, so it can
be sure the alarm accuracy�
Local recording path
The camera will be automatically create a file folder named
“Record files” when the user don’t set “local recording path”
and launch recording directly, and then save recording file
to the folder�
Device web setting
Basic network settings
The user can also enter the Basic Network Settings to set
the IP address except using the search software “LSearch_
en�exe”�