media-tech IP WEBCAM MT4009, Инструкция по эксплуатации

Страница: 13 / 38

13
5.4.4 DNS Server
This menu allows you to enter the IP address of the DNS
(Domain Name Server ).
By doing this, you can replace the IP address of the IP
WEBCAM with an http name (such as myIP WEBCAM.XXX),
making it easier to remember. The default DNS1 value is
“168.95.1.1” (Hinet). If the connection fails, the system will
automatically attempt to connect to DNS2.
5.5 Server Setup
This menu allows you to enter various server settings, in-
cluding:
- Mail Server - DDNS Server
- FTP Server - NTP Server
5.5.1 Mail Server
This refers to settings pertaining to sending image fi les via
a mail server. You must also make sure that the Mail Image
settings from 5.3 EventTrigger are enabled to e-mail a fi le
to the designated address upon event trigger. This system
supports SMTP servers.
How to use mail server settings:
Step 1: Enter the IP address or http web address of the mail
server in “IP/Host”.
Step 2: Enter the e-mail address of the sender in “Mail
From”.
Step 3: Enter the e-mail address of the recipient in “Receipt
to”.
Step 4: Enter the registered account ID of the mail server
in “Account ID”.
Step 5: Enter the correct mail server password in “Pass-
word”
Step 6: Enter whether or not your mail server requires au-
thorization in “Authorization”
Step 7: Click on Submit when you are fi nished.
5.5.2 FTP Server
This menu allows you to enter the FTP (File Transfer Proto-
col) Server settings. You must also make sure that the FTP
Image settings from 5.3 EventTrigger are enabled to send
a fi le to the designated FTP server via FTP upon event trig-
ger. This system supports Port Mode and Passive Mode.
TOP