manualshive.com logo in svg

medemagroup Mini Crosser X1 HD, Руководство по обслуживанию

Поделиться
Скачать
medemagroup Mini Crosser X1 HD Скачать руководство пользователя страница 98

10°

60°

Service manual 1533-2003-S

 98 of 108

Version 1.0.2/2020

Medema Production A/S

Adjusting the angle of the 

backrest

The angle of the backrest can 

be adjusted approximately 

140°. This is done by lifting 

this lever.

Adjusting the lumbar 

support:

The lumbar support can be 

adjusted by turning the handle 

counter-clockwise.

Headrest:

The headrest can be adjusted 

up/down in steps.

Flame resistance

The Mini Crosser seat’s flame resistance has been tested in 

accordance with DS/EN 1021-2:2014 Furniture - Assessment of 

the ignitability of upholstered furniture - Part 2: Ignition source 

match flame equivalent.

Warning!

The seat may become very hot if exposed to direct sunlight.

Similarly, the seat will become very cold if it is exposed to cold 

temperatures, e.g., frost.

Содержание Mini Crosser X1 HD













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды