manualshive.com logo in svg

medemagroup Mini Crosser X1 HD, Руководство по обслуживанию

Поделиться
Скачать
medemagroup Mini Crosser X1 HD Скачать руководство пользователя страница 57

Service manual 1533-2003-S

 57 of 108

Version 1.0.2/2020

Medema Production A/S

Transporting by motor vehicle

The Mini Crosser must always be restrained and the hand 

brake locked during transport in a motor vehicle or trailer. 

Avoid lifting by the seat, covers, handlebars and armrests

If you just need to lift the Mini Crosser slightly, take hold of it 

between the rear lights and by the front bumper.

Important!

If you drop the Mini Crosser from a height of half a metre or 

more, there is a risk that the gears in the transaxle will be de

-

stroyed.

Secure it in the vehicle with belts attached to the two eyes at 

the front and two at the back. All the eyes are marked in yellow. 

See the section entitled “Securing to vehicle floor with belts”.

Electronic disengagement. Works only 

when the scooter is turned on. 

Disengagement button.

Содержание Mini Crosser X1 HD













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды