User guide P9-0133-B
46 of 62
Version 2.0.5 - 2015
Medema A/S
Lever for rotating the seat
The lever must be pulled back
to rotate the seat. The seat can
WKHQEHURWDWHGWRHDFKVLGH
locking at each 45°.
7KHOHYHULVVSULQJORDGHGDQGWKHVHDWLVORFNHGDXWRPDWLFDOO\
when the lever is released. This lever is located on the right side as
VWDQGDUGEXWFDQDOVREHSRVLWLRQHGRQWKHOHIWVLGH
:KHQWKHOHYHULVORFDWHGRQWKHOHIWKDQGVLGHLWPXVWEHSXVKHG
forward in order to rotate the seat instead of pulling back.
Out / in adjustment of the
lever for rotating the seat.
Lift the seat off the vehicle.
Loosen the two Allen screws
and the lever can now be
adjusted out and in to the
desired position.
Placement of lever for rotating
the seat on the left-hand side.
Remove the two Allen keys and pull
the lever out.
Insert the lever from the left-hand
side and tighten the Allen screws.
When installing the lever on the
OHIWKDQGVLGHWKHOHYHUPXVWEH
pushed forward to rotate the seat.
.
Mount the seat again.
In order to ensure that the
seat returns to the correct
SRVLWLRQWKHOHYHUIRUURWDWLQJ
the seat must be released in
order to place the seat.
Introduction to the Ergo2 seat
