User guide P9-0133-B
18 of 62
Version 2.0.5 - 2015
Medema A/S
Driving the Mini Crosser M1 HD
Getting in and out
It is important to learn a safe technique for getting in and out of
the Mini Crosser.
In general the following method should be followed:
•
Make sure that the Mini Crosser M1 HD is off (switch turned to 0)
ZKHQJHWWLQJLQDQGRXWRWKHUZLVHWKH0LQL&URVVHUFRXOGVWDUWLI
the accelerator was touched inadvertently.
•
Make sure that the brake is on. (Lever for disengaging motor in
top position.)
•
Put the steering column in vertical position.
•
,IQHFHVVDU\WXUQWKHVHDWWKURXJKRUDQGPDNHVXUHWKDW
it is locked in position (clicked into place).
•
,IQHFHVVDU\UDLVHWKHDUPUHVW
For some users the assistance of an attendant can be
recommended. The attendant should:
•
Take care not to injure him/herself when lifting/lowering/supporting
the user.
•
Make sure that the Mini Crosser is stable and unable to move.
Turn off the Mini Crosser and check that the brake is on and the
seat has been rotated until it clicks into place at either 45° or 90°.
•
Make sure that the seat the user is being moved to is stable.
Turn the Mini Crosser off, return the
steering column to upright position, rotate
the seat and raise the armrest.
IMPORTANT!
The Mini Crosser will turn
itself off automatically after
it has been stationary for
10 minutes even if the key
has been turned to driving
position. The battery indicator
ÀDVKHVZLWKODPSVDWDUDWH
of about 3 seconds.
7RUHVWDUWWKHYHKLFOHWKH
key must be turned to stop
position (0) and then to driving
position (1).
