Questions?
www.medela.ca, [email protected]
or
1-800-435-8316
21
20
1
4.3.1 Battery operation
1
4.3.3 Power operation
4.3.2 Display
2
1
2
Open the yellow fl ap and
plug the AC/DC transformer
cord into the motor unit.
*Battery must be in
compartment.
Open the battery
compartment on the
back by pressing the yellow
push button and sliding in
the direction of the arrow.
Insert the battery in the
direction shown by “This
side down” so that the gold
contacts on the battery
touch the gold contacts in
the device.
Before fi rst use, “bAtt”
appears in the display. Fully
charge the battery until
the battery indicator stops
fl ashing.
Plug the AC/DC transformer
into the mains socket.
Summary of battery charge status.
AC/DC transformer
connected to socket
Battery charge status
Battery fully charged, approx.
3 hours' expression
fl ashing
20 min. expression time
remaining. Battery removed
from motor unit
fl ashing
Low battery, needs charging
“bAtt”
fl ashing
Initial charge and charging
after removing the battery
(up to 24 hours charging
time)
WARNING
4.
Preparing for Pumping (cont.)
i
4.3.1 Battery operation:
If possible, do not remove the battery from the motor unit. Removing the
battery requires a charging time of up to 24 hours.
l The breastpump can be used during charging.
l The battery is charging as soon as the breastpump is connected to a power
source (even if the breastpump is not in use).
l If the breastpump has been
running for 30 minutes without any
manipulations, the Freestyle will
automatically switch off.
4.3.3 Power operation
Follow the exact order of the steps.
l Only use the AC/DC transformer
supplied with the Freestyle
breastpump.
l Make sure the voltage of the AC/DC
transformer is compatible with the
power source.
l Do not use force to push the battery into the battery compartment.
l Do not use Freestyle without battery – this can cause permanent damage to
your Freestyle motor.
NOTE
INFO
INFO
4.3 Powering your breastpump
Содержание Freestyle 27260
Страница 1: ...EN 04 47 FR 48 91...