Mede8er MED800X, Руководство пользователя

Страница: 8 / 44

Page7
θ
TV OUTPUT SETTINGS
If you do not get to see the X3D GUI on your TV you will need to toggle the X3D TV output until you get a
picture
.
TV SYS Toggle Procedure
The X3D has three video output options ie Composite Video (yellow RCA connector, Component Video (Red
- Green- Blue connectors) and HDMI. Each output option offers different screen resolution settings and these
will need to be adjusted to match the type of TV used.
It is suggested to use the Setup Menu to change the TV Out resolution. If you do not get a picture in the first
place then you can try to change the TV Out Resolution via the TV Sys button. To change the Video Output
on the X3D press the
TV SYS button on the remote and it will change the Video Output to the next available
output option. If after pressing the TV SYS button you still do not get a picture then press the TV SYS again
until you see the X3D GUI on your TV. Keep repeating this procedure until you see a picture on your TV.
OR
SCREEN CALIBRATION
For better accuracy in Video Play and Image Zoom we suggest you calibrate your TV screen. Go to System
Setup then Video and select Screen Size.
Using the left, right, up and down navigation buttons you can adjust the red rectangle to fit the outer frame
of your TV screen.
Note - Do not oversize the screen size as this could result in image artifacts when
viewing still images on certain brands of TV’s.
Press Enter to save
Once you see the X3D GUI on your TV then you must enter the Video Setup
mode and adjust the Video settings to match the screen size resolution of
your TV.