Mede8er MED800X, Руководство пользователя

Страница: 5 / 44

Make sure that the DC cable is unplugged. Turn the Mede8er upside down and unscrew the hard drive cover
screws x and y. Lift the hard drive cover and remove it, place it on a flat surface with the mounting tabs facing
upright. Fit a compatible SATA hard drive into place with the label facing upwards and the connectors facing
the side with the air vents. Secure the hard drive with the four screws provided.
Connect the hard drive power connector and the red SATA data connector from the player to the hard drive
diagram c. Re fit the hard drive cover into the Mede8er body and tighten the two securing screws x and y.
To reduce hard drive vibration noise you can use the supplied Neoprene pads. Just peel of the adhesive side
and stick onto the base as indicated in diagram d.
Page4