Mede8er MED800X, Руководство пользователя

Страница: 14 / 44

Page13
WIRELESS PCIE ANTENNA INSTALLATION (Factory Fit)
Certain models of the MED800X3D (depending on the region) may be available with a factory fitted PCIE WiFi
kit. Check the packaging information to confirm if your model has the pre installed WiFi Kit.
For user instructions for the installation of the Mede8er MED20PCIE WiFi Kit into the MED800X3D --
Pls check for the latest online user Guide on the Mede8er Website.
http://www.mede8er.com/mede8er_support.html
WIRELESS NETWORK SETUP (basic)
The Mede8er MED800X3D is only compatible with the Mede8er Wireless Dongle MED10WFB USB WiFI
Dongle / MED20PCIe PCIe WiFi Kit. (Other brands will not work)
Refer to User Instructions supplied with the Mede8er dongle for detailed wireless connection setup.
Only use model MED10WFB WiFi Dongle as it is supplied together with the USB extension cable base.
WIRELESS NETWORK CONNECTION
Plug the MED10WFB into the USB extension base that was supplied with your Mede8er. Plug the USB cable
into one of the USB host ports on the side of the Mede8er. Extend the cable and try to place the base in a
position that is away from any metal object that could effect the RF signal strength. The best placement for the
dongle will depend on your particular environment. In order to get the best placement you may need to extend
the length with an additional USB extension cable.
The operating distance or range of your wireless connection can vary significantly based on the physical
placement of the Router and the WiFi Dongle.
For best results, place your Router:
* Near the center of the area in which your Mede8er will operate,
* In an elevated location such as a high shelf,
* Away from potential sources of interference, such as PCs, microwaves, and cordless phones,
* With the Antenna screwed in tight and in the upright position,
* Away from large metal surfaces.
SMA Antenna Connector
PCIE Antenna
Factory Fitted PCIE Kit
Screw the antenna into the SMA
antenna connector on the X2.
Twist the antenna gently into the
vertical position as shown.