Chapter 4 Operation
- 10 -
4.2 Introduction of the Function Module
4.2.1
Main Interface
Press the power switch button to start up the Main Unit. The screen displays patient information (if
it is used together with the Tablet PC), battery power and volume value, and the initial value of the
volume is 0 ml, as shown in Fig. 4.1.
<New>
Patient Name
M
0 ml
①
⑥
④
②
⑦
⑤
③
Fig. 4.1 Main Interface
Introduction of Display Area:
①
Wireless Connectivity
Wireless connectivity should be used together with the Tablet PC. When the device is connected
successfully with the Tablet PC via Wi-Fi connection, the icon of Wi-Fi is displayed in this area,
otherwise, the icon will not be displayed, see
§
4.3.4 Main Unit Connection
.
②
Group Number
The group number of the current measuring case is displayed when it is used together with the
Tablet PC.
③
Scanning State
This area displays the scanning state: when the device is scanning,
“S” is displayed and there is
no display, when the device is not scanning.
④
Battery Power
The remaining battery power is displayed in this area by bars; four bars represent full battery
power, as shown in Fig. 4.2a. As the Main Unit consumes the battery power, the indicator bars will
become fewer and when the battery power is almost exhausted,
there’s no indicator bar, as shown
in Fig. 4.2b; please complete the operation as soon as possible and turn off the power. Charge the
①
Wireless Connection
②
Group Number
③
Scanning State
④
Battery Capacity
⑤
Patient Name
⑥
Volume value
⑦
Patient Measurement Mode
