*This intellectual property copyright belongs to Shenzhen Med-link Electronics Tech Co., Ltd
(hereinafter referred to as the Med-link.
Disclaimer:
The company owns all copyrights in this document, including published and
unpublished documents, and classifies the document as a confidential document. This
document is intended to be used as a reference, operation, and understanding of the
company's product or component repair policy. Any use for promotional or any other
misconduct will be considered illegal. In order to prevent infringement, the company has the
right to protect its legal rights and interests through legal channels in accordance with the
provisions of the Copyright Law. No partner may copy, use or disclose the information to any
other third party without the written authorization of the company. Our company is not
responsible for any illegal incidents or issues involving third party interests. In addition, all the
information contained in this manual has been confirmed. The company does not assume any
responsibility for accidental injury or life-threatening caused directly or indirectly due to
improper use or operation. All information contained in this manual is protected by law. Any
changes or modifications in the contents of this manual are subject to change without notice.
The definitions of the following symbols shown in this manual:
The materials used for the pulse oxycarbon oxygen saturation sensor or the pulse oxycarbon
oxygen saturation sensor and the contact part of the main casing and the human body are
TPU, ABS, and silica gel. These materials have been tested to comply with relevant national
regulations.
Note
Warning
1 Overview
1
1.1 Declaration
Note:
1.Technical parameters are subject to change without notice;
2.The circuit diagram, parts catalog, schematic diagram, calibration rules, etc.of the
product are only authorized by our professional engineers;
3.The product is calibrated at the factory and does not require calibration of the product
during use;
4.To ensure the accuracy of the probe measurement, replace the probe once a year.
* Please read the manual carefully before using this product.
Warning:
Please use the accessories specified by our company (see Appendix P);
Please note that this product is only used for veterinary.It can not be used for
human clinical!
If it is used for human rather than animal by the users and caused the direct
or indirect injury. Users should be totally responsable for it. It has nothing to do
with us!
Symbol
SpO2
PI
PR
Name Meaning
Arterial oxygen saturation
Perfusion Index
pulse rate
Unit
%
%
BPM
2
The COX801VB is a hand-held pulse oximeter that uses non-invasive measurement of
transmission.
A monitor that measures SpO2, PR, PI, pulse wave intensity, and pulse wave using a pulse
oximetry sensor.
The COX801VB features continuous measurement on a 5-inch TFT screen. The COX801VB
provides two display states for both horizontal and vertical screens.
1.2 Product Description
Since the non-invasive pulse and blood oxygen saturation measurement are based on
the pulsation of the small arteries, the tester's blood should ensure a steady flow. When
a subject is weakly perfused due to vibration, low temperature environment, major
bleeding, or medication using systolic blood vessels, the waveform displayed by the
device will shrink and, therefore, sensitively interfere with the measurement of the
product.
9 kinds of heavily diluted colored drugs, such as: blue, indigo, green and acidic indigo
methylene, or carboxyhemoglobin, or methionine, or hemosin and some jaundice,
Measuring pulse oximetry with this device can lead to erroneous results.
Related drugs such as dopamine, procaine, prilocaine, lidocaine and budacaine tend to
be factors that affect serious errors in pulse oximetry.
Shock, anemia, hypothermia or the application of vasoconstrictor drugs cause arterial
blood flow to drop to an unmeasurable level;
Intravascular stains such as phthalocyanine or methylene blue may affect the
measurement.
Do not fix the sensor of this product in a location where the animal has tissue damage.
Not suitable for use in animals allergic to TPU, ABS, silicone plastic.
The pulse oximetry sensor can detect or continuously detect non-invasive SpO2, PR, PI,
etc. of the animal.
This product can be used in hospitals, homes, medical clinics, mobile medical aid
stations, etc.
1.4 Intended use and scope of application
1.5 Contraindications
1.3 Product model
Model
Main model
COX801VB
Cover model
COX802VB
Difference
Bluetooth module
Handheld
Transmission method
No bluetooth module
structure
Measuring principle
●
●
●
●
●
●
●