(a) We are not responsible for any damage caused by force majeure. Such as fires, lightning,
floods, hurricanes, hail, earthquakes, house collapses, riots, aircraft and traffic accidents,
deliberate damage, lack of fuel and water, labor disputes, strikes and lockouts and so on.
(b) Non-service item
Related expenses and insurance costs caused by disassembly, refurbishment, reassembly and
movement of equipment or its components.
Instrument adjusted, installed and equipment parts replaced by third-party companies which are
not recommended by us .
Equipment damage and malfunction caused by the users or representatives who did not operate
instrument in accordance with the operating manual.
(c) For equipment failures caused by equipment installation or connection to external equipment,
such as printers, computers, network cables, etc.If these operation without our permission ,
maintenance fee will be charged.
(d) Limitation of liability
During the validity period of the maintenance contract, if the user replaces the parts produced by
other manufacturers without our permission, we have the right to terminate the contract.
12.2 Exemptions and restrictions
21
13 Repackaging
●
There are dirt and non-original marks that cannot be removed on the device housing.
●
The device and accessories are physically damaged.
●
Residual liquid and other foreign matter are present on the equipment, which causes short
circuit and trouble of the power strip.
●
All probes and accessories are consumer products, not for free
●
Damage of the probe caused by mechanical force is not included in the free range.
●
Difficulties in measurement or inaccurate data due to limited measurement principles.
●
Equipment damage caused by non-original packaging during transportation.
●
Equipment failure caused by disassembly of equipment by professional or authorized
personnel who are not belong to our company.
●
Equipment failure caused by incorrect operation without carefully reading the user manual.
12.3 Non-warranty principle
●
The warranty period of our equipment is set according to the electronic product after-sales
service standards stipulated by national laws.
●
The warranty period is one year for mainframe and three months for all accessories.
●
Due to the fast update of electronic products, if the warranty time required by the user exceeds
the regulations, we will consider it as appropriate.
●
For users who require more than three years warranty, we will not resell equipment parts to
them during the warranty period.
●
We will upgrade the equipment or update the maintenance method, and the minimum price of
the new equipment will be charged if it is approved by the customer.
●
Remove all accessories and put them in a plastic sleeve.
●
Try to use the original box and packaging materials. During the transportation process, the
damage caused by improper packaging is borne by the user.
●
If during the warranty period, please provide a copy of the relevant warranty card and invoice.
●
Please describe the fault phenomenon in detail and provide the equipment at the same time.
12.4 Special requirements for warranty time
22
Production date:
shown as label
Manufacturer:
Shenzhen Meid-link Electronics Tech Co., Ltd.
Address:
Building A, Ying Tailong Ind Park, Dalang South Road, Dalang Street,
Longhua, Shenzhen, China, 518109
Hotline:
400-058-0755
Fax:
+86 755 61120055
E-mail:
Website:
www.medxing.com
14.1 Product registration / after sales information
Remove the probe oximeter from the box and check if the shipping label is damaged, then check
that if all parts are complete according to the packing list.Please save the invoice, the bill of the
goods and all the packaging information. These can be used as a basis for negotiations with the
shipping company due to incomplete or damaged goods.If any parts are missing or damaged,
please contact our technical service department immediately.
Contact us
：
Tel
：
+86 755 61120085
Fax
：
+86 755 61120055
：
14.2 open box to check
14.3 Packaged goods
14 About after sales
Description
Quantity
Veterinary palm pulse oximeter (host device)
Pulse oximetry sensor tongue clamp
user's manual
Type-C Charging Cable
1 piece
1 piece
1 piece
1 piece