MED Associates PHM-104A, Руководство пользователя, Страница: 15 / 22

MED ASSOCIATES, INC. PHM-104A HIGH/LOW SPEED PRECISION PUMP
P104A_Init(MG)
Syntax:
~P104A_Init(MG);~
Where: MG = MED-PC Global Parameter.
Comments: Initializes the PHM-104A pump. Must be used at beginning of program. This
command only needs to be executed once.
Example:
S1,
#START: ~P104A_Init(MG);~ ---> S2
P104A_PumpSetup(MG, BOX, P1, P2, P3, P4, P5)
Syntax:
~P104A_PumpSetup(MG, BOX, P1, P2, P3, P4, P5);~
Where: MG = MED-PC Global Parameter.
BOX = MED-PC BOX Parameter. The calling Box.
P1 = Pump Number that this command is for (valid values 0 – 29).
P2 = Dose in
µ
L.
P3 = Rate in
µ
L/sec.
P4 = Syringe Size, either 10, 100, or 500.
P5 = P104A_NULL
= Updates values only.
P104A_SAVE = Values are saved as new Default values.
P104A_INJECT
= Updates values and begins pump injection cycle.
Comments: Sets the infusion parameters for the pump. The maximum and minimum Rates are
dependent on the Syringe Size and Dose.
To determine if the selected Dose and Rate are valid for the Syringe Size it is
recommended that the numbers be tested using the sample PHM-104A test
program.
Example:
S2,
1": ~P104A_PumpSetup(MG, BOX, 1, 5, 25, 500, P104A_SAVE);~ ---> S2
P104A_PumpInject(MG, BOX, P1)
Syntax:
~P104A_PumpInject(MG, BOX, P1);~
Where: MG = MED-PC Global Parameter.
BOX = MED-PC BOX Parameter. The calling Box.
P1 = Pump Number that this command is for (valid values 0 – 29).
Comments: Executes the injection cycle with the default parameters or with the parameters
that were set with the P104A_PumpSetup command.
Example:
S3,
#R1: ~P104A_PumpInject(MG, BOX, 1);~ ---> S3
- 11 -
DOC-187 Rev. 1.6 Copyright © 2019
Med Associates, Inc.