background image

3

iNtrODUCtiON

1.2.3  Indications for Use

the use of the device is indicated for all the intended patients (see 

Chapter 1.2.1 on page 

2

) for whom a polymerization treatment of light-curing dental materials is prescribed, by the 

treating physician, within the intended use of the device (see 

Chapter 1.1 on page 2

).

1.2.4  Users

The device must be used only by specialised and properly trained personnel, such as the dentist 

and/or  assistant,  adults  of  any  weight,  age,  height,  gender  and  nationality,  able-bodied.  No 

specific training activities are required for the use of the device.

1.3  Disclaimer

The manufacturer MECTRON disclaims all responsibility, express or implied, and cannot be held 

responsible for direct or indirect personal injury and/or property damage, occurring as a result 

of incorrect procedures linked to the use of the device and its accessories.

The manufacturer MECTRON cannot be held responsible, expressly or by implication of any 

type of injury to persons and/or damage to things, carried out by the user of the product and 

its accessories and happened by way of example and not of limitation, in the following cases:

• 

Misuse or use during procedures other than those specified in the destination of use of 

the product;

•  the environmental conditions for preservation and storage of the device are not 

complying with the requirements indicated in 

Chapter 8 on page 

15

;

•  the device is not used in accordance with all the instructions and requirements described 

in this manual;

•  the electrical system of the places where the equipment is used do not comply with the 

laws in force and the related regulations;

• 

Assembly operations, extensions, re-adjustments, upgrades and repairs of the device are 

carried out by personnel not authorized by MECtrON;

• 

Misuse, abuse, abnormal use, negligent use, intentional misconduct or use exceeding 

the limits of the device indicated and allowed and/or normal wear or deterioration, ill-

treatment and/or incorrect interventions;

• 

Any attempt to tamper with or modification of the device under every circumstance;

•  Breach of the requirements and the information contained in 

Chapter 5 on page 

10 

of 

the Use and Maintenance manual;

•  Unauthorized repairs in accordance with the indications contained in 

Chapter 9 on page 

23

 of this manual.

Содержание starlight s +

































Отзывы: