3
silverlight - manual of use and maintenance
00.0 Introduction
00.1 Foreword
Before proceeding with the installation, use, maintenance or any other activities on the equipment
please read this manual carefully.
Always keep this manual within easy reach.
Important:
To avoid causing personal injuries or damage to property, read all the points concerning
“Safety requirements” contained in this manual with particular attention.
Depending on the level of risk involved, safety requirements are classed under the following indications:
�
DANGER (always referred to personal injury)
�
WARNING (referred to possible damage to property)
The purpose of this manual is to ensure that operators are aware of the safety requirements, of the
installation procedures and of the instructions for correct use and maintenance of the apparatus.
The user is not authorized to tamper with the equipment under any circumstances.
If any problems are encountered, please contact a GC America Customer Service.
Any attempts on the part of the user or any unauthorized personnel to tamper with or alter the apparatus
will invalidate the warranty and release the manufacturer, Mectron S.p.A and the importer distributor, GC
America Inc, from any liability in respect of any harm or damage to persons or property.
The information and illustrations contained in this manual are updated to the date of publication indicated
on the last page.
The manufacturer Mectron S.p.A. is committed to continuous updating of products, which may entail
changes to components of the equipment.
If there are any discrepancies between the descriptions contained in this manual and your equipment,
please contact your dealer or the GC America Inc. Customer Service for explanations.
Using this manual for purposes other than those relating to the installation, use and maintenance of the
equipment is strictly prohibited.
00.2 Description of the apparatus
The Silverlight is an apparatus for polymerizing photo-hardening composites. It uses a source of light
consisting of a very high-efficiency monochromatic LED (wavelength comprised between
440 and 480 nm).
The light emitted by the LED is directed to the treatment area by means a fiber optic.
The equipment consists of a charging unit and a handpiece powered by a rechargeable lithium-ion battery.
The Silverlight can be used to operate in either of two emission modes:
-
Constant intensity of emission -
FAST
(cycle lasting 10 seconds);
-
Gradual intensity of emission -
SLOW RISE
(cycle lasting 20 seconds).
00.3 Intended use
The Silverlight device is a dental curing light unit intended for use in the oral cavity for the polymerization
of photo-hardening dental materials that are activated in the 440 – 480 nm. wavelength range.
IMPORTANT:
Although most dental composite materials are activated within this wavelength range, in case of
uncertainty consult the manufacturer’s composite specifications
Содержание Silverlight
Страница 1: ...Manual of use and maintenance...