mectron MICROPIEZO, Руководство по эксплуатации и обслуживанию

Страница: 155 / 262

61
METHODS AND PRECAUTIONS FOR DISPOSAL
10 METHODS AND PRECAUTIONS FOR
DISPOSAL
WARNING: Hospital waste.
Treat the following objects as hospital waste:
• Inserts, when worn or broken;
• Inserts tightening wrench, when worn or
broken.
Disposable materials and materials that carry
biological risk must be disposed of according
to local regulations in force regarding
hospital waste.
WARNING: When handling the inserts,
pay particular attention to the sharp, pointed,
irregular parts to avoid any wounds or
injuries.
MICROPIEZO must be disposed of and treated
as waste subject to separate collection.
NOTE: MICROPIEZO packaging is made
from 100% recyclable materials that are
easy to sort. Specifically: Paper (PAP) and
Polyethylene (PE).
Failure to comply with the previous points can
result in a penalty pursuant to the directive
on waste electrical and electronic equipment
(WEEE).
The buyer has the faculty to deliver the device
to dispose of to the retailer who supplies
the new equipment; instructions for proper
disposal are available at MECTRON.
11 TECHNICAL DATA
Device compliant with Regulation (EU)
2017/745
Class lla
Classification under the IEC/EN 60601-1 II
Parts applied: type B (insert)
IP 20 (appliance)
IP 22 (pedal model FS-11 or FS-05)
Essential performance According to the standard IEC 80601-2-60
the device has no essential performance
Appliance for intermittent operation 55 sec. ON - 30 sec. OFF with irrigation
30 sec. ON - 120 sec. OFF without irrigation
Power Supply 100-240 V~ 50/60 Hz
Max. current
1,5A ( 24V)
Battery The device is equipped with a backup
battery, which can only be replaced by an
Authorised MECTRON Service Centre.
Model: BR/CR 1220
Working Frequency Automatic Scan
From 24 KHz to 36 KHz
Powers type endo
perio-scaling
prosthetics
soft-mode