mectron MICROPIEZO, Руководство по эксплуатации и обслуживанию

Страница: 135 / 262

41
CLEANING AND STERILISATION
Holding the tank in a vertical position,
insert it on the machine core unit of the
device until it comes into contact;
CAUTION: Do not overturn the tank.
The plug is not watertight. The outflow
of physiological solution or aggressive
liquids may cause damage to the
surfaces.
4
Remove the handpiece connector from
its seat.
5
Position the scaler handpiece connector
above a container or sink to catch the
liquid released during the disinfection
cycle;
6
Press the
FLUSH
button on the touch
keyboard twice (LONG FLUSH - see
Chapter 6 on page 31 ). The water and
power flow rate control will illuminate.
The button
FLUSH
will flash;
NOTE: It is possible to exit from the
cleaning mode at any time by pressing
again the button
FLUSH
; the keyboard
will be active again by returning the last
configuration used;
7