mectron MICROPIEZO, Руководство по эксплуатации и обслуживанию

Страница: 136 / 262

42
MICROPIEZO
To start the LONG FLUSH cycle , press the
pedal and release wile the FLUSH button
flashes;
The cycle can be stopped at any time
by pressing again the button FLUSH or,
alternatively, when the pedal is pressed
again.
The keyboard will be active again by
returning the last configuration used.
8
The system will activate the water pump
with flow rate 6 for 20 seconds.
The numbers on the water scale
and those on the power scale will
progressively turn off in succession
indicating the progress of the procedure:
first the numbers from 6 to 0 on the
water scale, and then the values from
prosthetics to 0 on the power scale.
The
FLUSH
button will remain lit for the
whole duration of the procedure (20
seconds).
Once the cycle is complete, the
keyboard will be active by setting the
last configuration used.
9
1 2
Repeat the LONG
FLUSH
cycle (see points
7 to 9 of the procedure) a second time;
10
At the end of the LONG
FLUSH
cycles,
wait 12 minutes;
11
Repeat the LONG
FLUSH
cycle (see points
7 to 9 of the procedure) 3 times;
12