Mecmesin Vortex-dV Скачать руководство пользователя страница 9

Страница: 9 / 36

4.1

4.2

4.3

4.4

4.5

Unpacking and Parts Supplied

Inspection and Unpacking

Before installing or operating the Vortex-

system ensure that no visible damage has occurred during the

shipping of the device

Important!

If any damage is discovered, do not proceed with the installation and contact your local

supplier immediately who will decide the most appropriate action and rectify the situation as quickly
as possible.

Packaging

We strongly recommend that the packaging is retained, as this can be useful if the machine needs to be returned
for calibration or shipped to another location.

Parts supplied

with the Test Stand, details the parts that should be included with your test stand. Please contact

Mecmesin or your authorised distributor if any items are missing or damaged.

Moving the Test Stand

The unpackaged weights of each test stand are listed in the

Specification

tables. Do not try to lift

heavy loads unaided. It is advised to use suitable lifting equipment and follow safe handling
guidelines when moving your Vortex-

system.

Parts Supplied

Please see the table below for the list of parts supplied with the Vortex

-dV

system.

Item

Quantity

Vortex-

test stand is supplied with a pre-selected torque transducer (1.5, 3, 6, or 10 N.m)

AFTI gauge bracket (for fitting an AFTI torque indicator to the column)

Hex key for tightening crosshead to gauge bracket

Mains cable

Document: A Guide to Safe Use of Mecmesin Mains Powered Test Systems

Online Manual Information Guide

Accessories

For a full range of digital force gauges and accessories, please go to the Mecmesin website:

help.mecmesin.com

or your

local distributor

For connection of the stand to your computer, a Mecmesin supplied 2m USB-B to USB-A cable
communications cable is required, (

part no. 351-093)

For a Mark 1 Vortex-

dV -

Use communications cable (

part no. 351-092

) to connect the Mecmesin Advanced

Force and Torque Indicator (AFTI) to the Vortex

-dV

For an Interlock enabled Vortex-

dV -

Use communications cable (

part no. 351-103),

to connect Mecmesin

Advanced Force and Torque Indicator (AFTI) to the Vortex

-dV

Содержание Vortex-dV





































Результаты поиска

Содержание Vortex-dV

Отзывы:

Похожие инструкции для Vortex-dV

Бренды по названию

Популярные бренды

Mecmesin Vortex-dV, Руководство пользователя

Результаты поиска

Содержание Vortex-dV

Отзывы:

Похожие инструкции для Vortex-dV

Бренды по названию

Популярные бренды