Mecmesin Vortex-dV Скачать руководство пользователя страница 3

Страница: 3 / 36

2.1

2.1.1

Introduction

VectorPro™ and VectorPro™ Lite

are registered trademarks of Mecmesin Ltd.

This document refers to Mecmesin Vortex

-dV

test stands operating the latest firmware version.

It is essential that you familiarise yourself with the contents of this manual and the separate ‘

Guide

to Safe Use of Mains Powered Test Systems

’ before attempting to operate your Vortex-

Test

System.

This reference manual covers the operation of Vortex

-dV

test stands in conjunction with the use of

Mecmesin digital Advanced Force Torque Indicator (AFTI). Operation of the AFTI is covered in a
separate manual.

All interlocked guarding for the Vortex-

is supplied as a 'PDV' (

Product Design

Variants

)

This means they will be supplied as a additional item

upon special request only

. Please

contact your local Mecmesin sales representative or authorised distributor for more details.

The following manuals may aid you in the use of your test stand:

Guide to Safe Use of Mains Powered Test Systems (431-398)

Covers the initial setup, installation and safety implications for intended use of, any Mecmesin supplied, mains-
powered equipment.

Advanced Force Gauge (AFG Mk4) Operating Manual (431-213)

Runs through the operation of Advanced Force Gauge in conjunction with
Vortex-

test stands.

VectorPro™ User Manual - Introduction and Initial Setup (431-955)

Covers the initial setup and installation of VectorPro, as well as the basics of the
software functionality and user manuals. Further guidance relating to other aspects of
VectorPro can be accessed through this user manual.

User Manual Icons

Throughout this manual, the icons shown below are used to identify important health and safety information as
well as additional installation/operation guidance. Do not proceed until each individual message is read and
thoroughly understood.

Warning

The

warning

icon highlights a situation or condition that may lead to possible personal injury or

damage to the associated equipment.

Содержание Vortex-dV





































Результаты поиска

Содержание Vortex-dV

Отзывы:

Похожие инструкции для Vortex-dV

Бренды по названию

Популярные бренды

Mecmesin Vortex-dV, Руководство пользователя

Результаты поиска

Содержание Vortex-dV

Отзывы:

Похожие инструкции для Vortex-dV

Бренды по названию

Популярные бренды