Mecmesin MultiTest 0.5-i Скачать руководство пользователя страница 5

Страница: 5 / 24

Assembly and Installation of –

System Test Stands

Mecmesin



Items Supplied with the Test Stand

1.1

MultiTest-

test stand

Test stand

Four rubber feet, four attachment screws

Four base anchoring brackets, (if applicable)

Adjustable handle lever to secure loadcell to crosshead

At least one Intelligent Loadcell (ILC)

CD with Emperor™ software

Mains and data cables

Manual:

Guide to Safe Use of Mecmesin Mains-Powered Test Stands

1.2

Vortex-

test stand

Test stand

Intelligent Torque Cell (ITC), as an integral part of the crosshead

CD with Emperor™ software

Mains and data cables

Manual:

Guide to Safe Use of Mecmesin Mains-Powered Test Stands

The test stand provides a stable platform with a moving crosshead (force testing) or

rotating platen (torque testing). The Intelligent Loadcell measures the force developed,

and the Intelligent Torque cell measures the torque applied. A desktop PC or laptop

computer is used to run the Emperor™ software that provides the control of the moving

part of the stand, and records, stores and displays the information provided by the

measuring cell. Emperor™ is used to create the program for the test, and can make

calculations on the received data. The results of the calculations and the raw data can be

printed out or saved in files, and may be exported for remote, secure storage, or may be

used for further analysis by other software applications.

The stand communicates with the controlling computer via a USB or serial connection. If

other connections are available, then peripheral devices such as printers and network

connections can be added.

Содержание MultiTest 0.5-i

























Результаты поиска

Содержание MultiTest 0.5-i

Отзывы:

Похожие инструкции для MultiTest 0.5-i

Бренды по названию

Популярные бренды

Mecmesin MultiTest 0.5-i, Сборка и инструкция по установке

Результаты поиска

Содержание MultiTest 0.5-i

Отзывы:

Похожие инструкции для MultiTest 0.5-i

Бренды по названию

Популярные бренды