Page 28
MMAE16 - Servce & Parts Manual
Aprl 2022
Secton 10 - Mantenance
Yearly Maintenance
The following maintenance should be done every year or 1,000 hours of operation.
1) Inspection of the Condition of the Electric Cylinder
Tools will be required to perform this procedure.
New parts will be required to perform this procedure.
Dealer service will be required to perform this procedure.
The Electric Cylinder in good condition is essential to machine performance and service life. The
Electric Cylinder which is not lubricated fully will influence machine performance, and with continued
use, spare parts can be damaged. This operation should be carried out more frequently under severe
working conditions
If the Electric Cylinder sends out abnormal sound, please add the lubricating grease promptly.
If the lubricating grease is not replaced at the two year inspection, test the grease quarterly. Replace
the grease when it fails the test.
Raise the platform to the position where the fat-liquoring port exposes completely.
Fat-Liquoring
Port
ART_5958F
Disconnect the battery pack from the machine, and let the machine stand for a hour at last.
Electrocution / burn hazard����� Contact with electrically charged circuits
could result in death or serious injury����� Remove all rings, watches and
other jewelry�����
Remove the plug from the fat-liquoring port.
Add a moderate amount of lubricating grease. (Lubricating Grease Type - Mobil SHC220)
Clean any spilled lubricating grease.
Install the battery pack, then raise and descend the platform a few times. Inspect the condition of
the machine.
Electrocution / burn hazard����� Contact with electrically charged circuits
could result in death or serious injury����� Remove all rings, watches and
other jewelry�����
•
•
•
1.
2.
3.
4.
5.
6.
