Page 13
MMAE16 - Servce & Parts Manual
Aprl 2022
Pre-start Inspection Report
Be sure that the operator’s manual is complete and legible.
Be sure that all decals are legible and in place. See Decals section.
Check for battery fluid leaks and proper fluid level. Add distilled water if needed. See Maintenance section.
Check the following components or areas for damage, improperly installed or missing parts and
unauthorized modifications:
Electrical components, wiring and electrical cables
Battery and connections
Drive motors
Wear pads
Wheels
Lifting chains and idler wheels
Mast and mast braces
Limit switches, alarms and horn
Nuts, bolts and other fasteners
Platform entry gate
Alarms and beacons (if equipped)
Platform Control Panel
Pothole guard
Check entire machine for:
Cracks in welds or structural components
Dents or damage to machine
Be sure that all structural and other critical components are present and all associated fasteners and pins
are in place and properly tightened
NEVER perform work or inspection on the machine with the platform
elevated without first supporting the platform with either a forklift or
a crane����� Alternatively, use a 2”×4” or recommended a 4”×4” a piece of
wood to support the mast section that is attached to the platform�����
See page 7 for instructions�����
Secton 10 - Mantenance
Pre-start Inspection Report
