Page 6 Version 2
Step 17
– With the machine pointed in a safe direction, press the fire button on
the pull cord or radio release. This will cause the machine to fire a clay and then
reset to the firing position. Pressing the fire button again will do the same as
above. Pressing and holding the fire button will continuously fire clays without
delay.
Your machine is now operating smoothly and ready for use.
IT IS CRITICAL
THAT YOU NEVER LOAD OR MAKE ADJUSTMENT TO THE MACHINE
UNLESS IT IS DISARMED
AND THE BATTERY DISCONNECTED.
While in storage, the machine must be left in the disarmed state and the battery
disconnected. Any spring tension does not need to be released.
